I was asked to carry out a repair to this gate hook. It had worn down fairly substantially in the past decades. Having taken advice from a professional I chose to weld a new bit of steel to the existing pin there by restoring it to closer to what it used to be. I picked up some three quarter inch diameter round bar stock (mild steel). Having and cut a length of it equivalent to the length of the existing pin and I then away from this bit of bar so that they two fitted together to form a round pin. Then it was just a case of welding it into one lump. As it was, This picture was in this blog entry: https://bhhh.co.uk/circles/ Here you can see the very clean (wire brushed using the angle grinder) existing hinge pin and the slightly rust coloured bit of mild steel sitting […]
I happened to be up the Church tower yesterday, setting up for the teddy bear zip line. I took a few pictures I though might be worth sharing. If you look really closely at the hill, Castle Hill that is, you can just about make out the Jubilee Beacon pile of fire material (Bottom right photo).
Recent Comments