Bikes up and bench better

I spent a couple of hours last night tidying and working on the bench.

I made a couple of plywood hooks to hang two of the bikes from.

I managed to strip the concrete that one of the hold down bolts was going into, so had to make up my own chemical anchor solution using a but of tile grout and some water, than ran the bolt into that. I hope it does something. I was only bolting it down so that when I have the vice mounted, I can apply an upward load on it and not have the work bench rise with it. The addition of the shelf was going well until I realised I couldn’t put the ply in because the black shelves were in the way, so now I’ll have take all of the members out, put in the ply first and put them back.