I printed the circuit onto photo paper and cleaned the PCB board using a kitchen scrubber thingy, brand new. I then ironed the print onto the PCB board, I don’t think I ironed it for long enough or hard enough, so I wound up spending my evening colouring in the blackness using a Staedtler Permanent marker pen as supplied by the etching solution people from Ebay. [pe2-image src=”http://lh6.ggpht.com/-mI2FoHOrhY0/VSRA4zcO14I/AAAAAAAAIXQ/TstW-xLorOo/s144-c-o/GEDC6747.JPG” href=”https://picasaweb.google.com/100446983108465419613/7Apr2015#6135099937010931586″ caption=”” type=”image” alt=”GEDC6747.JPG” ] [pe2-image src=”http://lh6.ggpht.com/-iewjgFEbadI/VSRA1R-8B1I/AAAAAAAAIXI/YaFAWc3UoTQ/s144-c-o/GEDC6744.JPG” href=”https://picasaweb.google.com/100446983108465419613/7Apr2015#6135099876490086226″ caption=”” type=”image” alt=”GEDC6744.JPG” ] [pe2-image src=”http://lh5.ggpht.com/-8uz3AsiYZJ8/VSRA02_NSrI/AAAAAAAAIXE/tgRJshjizEc/s144-c-o/GEDC6745.JPG” href=”https://picasaweb.google.com/100446983108465419613/7Apr2015#6135099869243460274″ caption=”” type=”image” alt=”GEDC6745.JPG” ] [pe2-image src=”http://lh4.ggpht.com/-rB1bGf84GLY/VSRAtE7Pb7I/AAAAAAAAIW0/biG-basBJhs/s144-c-o/GEDC6743.JPG” href=”https://picasaweb.google.com/100446983108465419613/7Apr2015#6135099735545966514″ caption=”” type=”image” alt=”GEDC6743.JPG” ] [pe2-image src=”http://lh5.ggpht.com/-0zbedCu_nxM/VSRAsk_uH8I/AAAAAAAAIW4/fRkcD2BPURI/s144-c-o/GEDC6742.JPG” href=”https://picasaweb.google.com/100446983108465419613/7Apr2015#6135099726974820290″ caption=”” type=”image” alt=”GEDC6742.JPG” ] [pe2-image src=”http://lh5.ggpht.com/-uA0NO3xT0lE/VSRAoahbsaI/AAAAAAAAIWo/QhyHMZDEAgg/s144-c-o/GEDC6741.JPG” href=”https://picasaweb.google.com/100446983108465419613/7Apr2015#6135099655443952034″ caption=”” type=”image” alt=”GEDC6741.JPG” ] [pe2-image src=”http://lh4.ggpht.com/-aM4_TOXYb_U/VSRAnptZJnI/AAAAAAAAIWk/ir_9Kuv1_XY/s144-c-o/GEDC6740.JPG” href=”https://picasaweb.google.com/100446983108465419613/7Apr2015#6135099642340779634″ caption=”” type=”image” alt=”GEDC6740.JPG” ] [pe2-image src=”http://lh3.ggpht.com/-3NRFyd9-u2k/VSRAnEmqsSI/AAAAAAAAIWc/PKK5of8BK_s/s144-c-o/GEDC6739.JPG” href=”https://picasaweb.google.com/100446983108465419613/7Apr2015#6135099632380457250″ caption=”” type=”image” alt=”GEDC6739.JPG” ] [pe2-image src=”http://lh6.ggpht.com/-jttXbECjPbg/VSRAhDhxamI/AAAAAAAAIWQ/4DpvMXNcVMc/s144-c-o/GEDC6740%252520-%252520Copy.JPG” href=”https://picasaweb.google.com/100446983108465419613/7Apr2015#6135099529012275810″ caption=”GEDC6740 – Copy.JPG” type=”image” alt=”GEDC6740 – Copy.JPG” ]
We didn’t get up to a great deal over the long weekend, we did have Lynn and Gerry to visit on Friday and on Sunday visited Portsmouth where Hannah cooked a great roast! We visited Basildon Park (NT) on Saturday, which was pleasant but busy. Mowed the grass and kept busy around the house the rest of the time. [pe2-image src=”http://lh5.ggpht.com/-W2X2syE4vGM/VSLGJUL1CaI/AAAAAAAAIUo/nzCy1tDswbs/s144-c-o/20150404_144339.jpg” href=”https://picasaweb.google.com/100446983108465419613/OurBlog#6134683505771481506″ caption=”” type=”image” alt=”20150404_144339.jpg” ] [pe2-image src=”http://lh3.ggpht.com/-FN0QjsW-GZU/VSLGGk-ia9I/AAAAAAAAIUg/lOOk0nhRynE/s144-c-o/20150406_181612.jpg” href=”https://picasaweb.google.com/100446983108465419613/OurBlog#6134683458739530706″ caption=”” type=”image” alt=”20150406_181612.jpg” ] I started to design a printed circuit board for the shift registers to expand my Arduino board on Monday. [pe2-image src=”http://lh6.ggpht.com/-II4NK-foWjU/VSPFHFaivZI/AAAAAAAAIVk/v0R6kkz_G0I/s144-c-o/CircuitBoardColour.JPG” href=”https://picasaweb.google.com/100446983108465419613/7Apr2015#6134963842912009618″ caption=”” type=”image” alt=”CircuitBoardColour.JPG” ]
Recent Comments